Skip to main content
Version: 2.34.0

Average Latency Feedback

Overview

Degradation in response latency can serve as a reliable signal for identifying service overload. This policy is designed to detect overload situations based on latency deterioration. During overload, the request rate is throttled so that latency gets restored back to an acceptable range.

Configuration

This policy is based on the Load Scheduling with Average Latency Feedback blueprint. The latency of requests processed by the cart-service.prod.svc.cluster.local service is monitored. By analyzing the variance between current latency and a historical latency baseline, the policy facilitates the identification of potential service overload. A deviation of 1.1 from the baseline is considered as a signal of service overload.

In addition, workload prioritization is specified in the load scheduler based on user types accessing the service. User types are identified based on the value of a header label http.request.header.user_type. Requests matching label value guest are assigned a priority of 50, whereas those matching subscriber are given a priority of 200.

To mitigate service overload, the requests to the cart-service.prod.svc.cluster.local service are passed through a load scheduler. The load scheduler reduces the request rate in overload scenarios, temporarily placing excess requests in a queue.

As service latency improves, indicating a return to normal operational state, the request rate is incrementally increased until it matches the incoming request rate. This responsive mechanism helps ensure that service performance is optimized while mitigating the risk of service disruptions due to overload.

The below values.yaml file can be generated by following the steps in the Installation section.

# yaml-language-server: $schema=../../../../../../blueprints/load-scheduling/average-latency/gen/definitions.json
# Generated values file for load-scheduling/average-latency blueprint
# Documentation/Reference for objects and parameters can be found at:
# https://docs.fluxninja.com/reference/blueprints/load-scheduling/average-latency

blueprint: load-scheduling/average-latency
uri: ../../../../../../../blueprints
policy:
# Name of the policy.
# Type: string
# Required: True
policy_name: workload-prioritization
# List of additional circuit components.
# Type: []aperture.spec.v1.Component
components: []
load_scheduling_core:
aimd_load_scheduler:
gradient:
max_gradient: 1
min_gradient: 0.1
slope: -1
alerter:
alert_name: AIMD Load Throttling Event
load_multiplier_linear_increment: 0.025
max_load_multiplier: 2
load_scheduler:
# The selectors determine the flows that are protected by this policy.
# Type: []aperture.spec.v1.Selector
# Required: True
selectors:
- control_point: ingress
service: cart-service.prod.svc.cluster.local
# Scheduler parameters.
# Type: aperture.spec.v1.SchedulerParameters
scheduler:
workloads:
- label_matcher:
match_labels:
http.request.header.user_type: guest
parameters:
priority: 50.0
- label_matcher:
match_labels:
http.request.header.user_type: subscriber
parameters:
priority: 200.0
latency_baseliner:
# Tolerance factor beyond which the service is considered to be in overloaded state. E.g. if the long-term average of latency is L and if the tolerance is T, then the service is considered to be in an overloaded state if the short-term average of latency is more than L*T.
# Type: float64
latency_tolerance_multiplier: 1.1
# Flux Meter defines the scope of latency measurements.
# Type: aperture.spec.v1.FluxMeter
# Required: True
flux_meter:
selectors:
- control_point: ingress
service: cart-service.prod.svc.cluster.local

Generated Policy

apiVersion: fluxninja.com/v1alpha1
kind: Policy
metadata:
labels:
fluxninja.com/validate: "true"
name: workload-prioritization
spec:
circuit:
components:
- flow_control:
aimd_load_scheduler:
dry_run: false
dry_run_config_key: dry_run
in_ports:
overload_confirmation:
constant_signal:
value: 1
setpoint:
signal_name: SETPOINT
signal:
signal_name: SIGNAL
out_ports:
desired_load_multiplier:
signal_name: DESIRED_LOAD_MULTIPLIER
observed_load_multiplier:
signal_name: OBSERVED_LOAD_MULTIPLIER
parameters:
alerter:
alert_name: AIMD Load Throttling Event
gradient:
max_gradient: 1
min_gradient: 0.1
slope: -1
load_multiplier_linear_increment: 0.025
load_scheduler:
scheduler:
workloads:
- label_matcher:
match_labels:
http.request.header.user_type: guest
parameters:
priority: 50
- label_matcher:
match_labels:
http.request.header.user_type: subscriber
parameters:
priority: 200
selectors:
- control_point: ingress
service: cart-service.prod.svc.cluster.local
max_load_multiplier: 2
- query:
promql:
evaluation_interval: 10s
out_ports:
output:
signal_name: SIGNAL
query_string: sum(increase(flux_meter_sum{flow_status="OK", flux_meter_name="workload-prioritization",
policy_name="workload-prioritization"}[30s]))/sum(increase(flux_meter_count{flow_status="OK",
flux_meter_name="workload-prioritization", policy_name="workload-prioritization"}[30s]))
- query:
promql:
evaluation_interval: 30s
out_ports:
output:
signal_name: SIGNAL_LONG_TERM
query_string: sum(increase(flux_meter_sum{flow_status="OK", flux_meter_name="workload-prioritization",
policy_name="workload-prioritization"}[1800s]))/sum(increase(flux_meter_count{flow_status="OK",
flux_meter_name="workload-prioritization", policy_name="workload-prioritization"}[1800s]))
- arithmetic_combinator:
in_ports:
lhs:
signal_name: SIGNAL_LONG_TERM
rhs:
constant_signal:
value: 1.1
operator: mul
out_ports:
output:
signal_name: SETPOINT
evaluation_interval: 1s
resources:
flow_control:
classifiers: []
flux_meters:
workload-prioritization:
selectors:
- control_point: ingress
service: cart-service.prod.svc.cluster.local
infra_meters: {}

info

Circuit Diagram for this policy.

Installation

Generate a values file specific to the policy. This can be achieved using the command provided below.

aperturectl blueprints values --name=load-scheduling/average-latency --version=v2.34.0 --output-file=values.yaml

Apply the policy using the aperturectl CLI or kubectl.

aperturectl cloud blueprints apply --values-file=values.yaml

Policy in Action

To see the policy in action, the traffic is generated such that it starts within the service's capacity and then goes beyond the capacity after some time. Such a traffic pattern is repeated periodically. The below dashboard demonstrates that when latency spikes due to high traffic at cart-service.prod.svc.cluster.local, the Controller throttles the rate of requests admitted into the service. This approach helps protect the service from becoming unresponsive and maintains the current latency within the tolerance limit (1.1) of historical latency.

Basic Service Protection

Dry Run Mode

You can run this policy in the Dry Run mode by setting the policy.load_scheduling_core.dry_run parameter to true. In the Dry Run mode, the policy does not throttle the request rate while still evaluating the decisions it would take in each cycle. This is useful for evaluating the policy without impacting the service.

note

The Dry Run mode can also be toggled dynamically at runtime, without reloading the policy.

Demo Video

The below demo video shows the basic service protection and workload prioritization policy in action within Aperture Playground.

Demo Video