Skip to main content
Version: 2.34.0

Nginx

Integrating Aperture with Nginx using Lua modules.

Nginx

Nginx

Introduction

info

This integration is currently only supported with the self-hosted version of Aperture Agent.

Lua's modules are scripts that can be executed within Nginx to extend its functionality. The Aperture Lua module can be downloaded from the GitHub Aperture Release Page.

Pre-requisites

Before proceeding, ensure that you have the following installed:

info

Skip these steps if the Nginx server is running on a Container.

  1. Nginx server
  2. lua-nginx-module enabled for Nginx. If not, follow the installation steps.
  3. LuaRocks, which is a package manager for Lua modules. Follow the installation steps.

Installation

To install the Aperture Lua module, follow these steps:

info

Refer to Example Dockerfile to get the steps for installing the Aperture Lua module for Nginx server running on Container.

  1. Install the opentelemetry-lua SDK by running the following commands:

    git clone https://github.com/fluxninja/opentelemetry-lua.git
    cd opentelemetry-lua
    luarocks make
  2. Download and extract the Aperture Lua module by executing the following commands:

    wget "https://github.com/fluxninja/aperture/releases/download/v2.34.0/aperture-lua.tar.gz" && tar -xzvf aperture-lua.tar.gz
  3. Install the module by running the following command:

    cd aperture-lua && luarocks make aperture-nginx-plugin-0.1.0-1.rockspec

Example Dockerfile

Use the following Dockerfile to install the Aperture Lua module with Nginx. This example uses fabiocicerchia/nginx-lua as the base image because it already has the lua-nginx-module pre-configured with Nginx.

FROM fabiocicerchia/nginx-lua:1.23.3-debian-compat

RUN apt update && apt-get install -y build-essential git

RUN git clone https://github.com/fluxninja/opentelemetry-lua.git && cd opentelemetry-lua && luarocks make

RUN curl --fail --location --remote-name "https://github.com/fluxninja/aperture/releases/download/v2.34.0/aperture-lua.tar.gz"

RUN tar -xzvf aperture-lua.tar.gz && luarocks make aperture-nginx-plugin-0.1.0-1.rockspec

COPY nginx_config.conf /etc/nginx/nginx.conf

ENTRYPOINT [ "nginx", "-g", "daemon off;" ]

Configure Nginx

Follow these steps to configure Nginx to use the installed Aperture Lua module:

  1. To connect to the Aperture Agent, you need to create an environment variable called APERTURE_AGENT_ENDPOINT. The value of this variable should be set equal to the endpoint of the Aperture Agent. If you are using a bash shell, you can create this variable by running the following command:

    echo 'export APERTURE_AGENT_ENDPOINT="http://aperture-agent.aperture-agent.svc.cluster.local"' >> ~/.profile

    Replace the endpoint value with the actual endpoint value of the Aperture Agent if you're on a different one.

  2. Optionally, create an environment variable APERTURE_CHECK_TIMEOUT, which would be considered as a timeout for execution of the Aperture check. The default value for it is 500m, which is 500 milliseconds. For example, use the following command in bash:

    info

    The format for the Timeout parameter can be found at the following link.

    echo 'export APERTURE_CHECK_TIMEOUT="1S"' >> ~/.profile
  3. Add the init_by_lua_block section under the http block of the Nginx configuration to initialize the Aperture Lua module:

    http {
    ...
    init_by_lua_block {
    access = require "aperture-plugin.access"
    log = require "aperture-plugin.log"
    headers = require "aperture-plugin.headers"
    }
    ...
    }
  4. Add the access_by_lua_block section under the http block of the Nginx configuration to run the Aperture check for all servers and locations before the request is forwarded to upstream:

    http {
    ...
    access_by_lua_block {
    local authorized_status = access(ngx.var.control_point)

    if authorized_status ~= ngx.HTTP_OK then
    return ngx.exit(authorized_status)
    end
    }
    ...
    }
  5. Add the header_filter_by_lua_block section under the http block of the Nginx configuration to add the headers received from Aperture check to the response being returned to the client:

    http {
    ...
    header_filter_by_lua_block {
    headers()
    }
    ...
    }
  6. Add the log_by_lua_block section under the http block of the Nginx configuration to forward the OpenTelemetry logs to Aperture for all servers and locations after the response is received from upstream:

    http {
    ...
    log_by_lua_block {
    log()
    }
    ...
    }
  7. Aperture needs control_point variable for referring the service in Aperture Policy, which needs to be set from Nginx location block:

    http {
    ...
    server {
    location /service1 {
    set $control_point "service1-demo-app";
    proxy_pass http://service1-demo-app.demoapp.svc.cluster.local:80/request;
    }
    }
    ...
    }
  8. Below is how a complete Nginx configuration would look such as:

    worker_processes auto;
    pid /run/nginx.pid;

    events {
    worker_connections 4096;
    }

    http {
    default_type application/octet-stream;
    resolver 10.96.0.10;

    sendfile on;
    keepalive_timeout 65;

    init_by_lua_block {
    access = require "aperture-plugin.access"
    log = require "aperture-plugin.log"
    headers = require "aperture-plugin.headers"
    }

    access_by_lua_block {
    local authorized_status = access(ngx.var.control_point)

    if authorized_status ~= ngx.HTTP_OK then
    return ngx.exit(authorized_status)
    end
    }

    log_by_lua_block {
    log()
    }

    header_filter_by_lua_block {
    headers()
    }

    server {
    listen 80;
    proxy_http_version 1.1;

    location /service1 {
    set $control_point "service1-demo-app";
    proxy_pass http://service1-demo-app.demoapp.svc.cluster.local:80/request;
    }

    location /service2 {
    set $control_point "service2-demo-app";
    proxy_pass http://service2-demo-app.demoapp.svc.cluster.local:80/request;
    }

    location /service3 {
    set $control_point "service3-demo-app";
    proxy_pass http://service3-demo-app.demoapp.svc.cluster.local:80/request;
    }
    }
    }