Skip to main content
Version: 2.34.0

Install with Operator

info

This method requires access to create cluster level resources such as ClusterRole, ClusterRoleBinding, CustomResourceDefinition and so on.

Use the Namespace-scoped Installation if you do not want to assign the cluster level permissions.

Controller Custom Resource Definition​

The Aperture Controller is a Kubernetes-based application and is installed using the Kubernetes Custom Resource, which is managed by the Aperture Operator.

The configuration for the Aperture Controller process is provided to the Controller CRD under the controller.config section. All the configuration parameters for the Aperture Controller are listed here.

Installation​

By following these instructions, you will have deployed the Aperture Controller into your cluster.

Refer

Kubernetes Objects which will be created by the following steps are listed here.

  1. Run the following install command:

    helm install controller aperture/aperture-controller

  2. By default, Prometheus and etcd instances are installed. If you do not want to install and use your existing instances of Prometheus or etcd, configure the following values in the values.yaml file and pass it with the install command:

    controller:
      config:
        etcd:
          endpoints: ["ETCD_ENDPOINT_HERE"]
        prometheus:
          address: "PROMETHEUS_ADDRESS_HERE"
    etcd:
      enabled: false

    prometheus:
      enabled: false

    Replace the values of ETCD_ENDPOINT_HERE and PROMETHEUS_ADDRESS_HERE with the actual values of etcd and Prometheus, which will be used by the Aperture Controller.

    helm install controller aperture/aperture-controller -f values.yaml

    A list of all the configurable parameters for etcd are available here, and Prometheus are available here.

    Note: Ensure that the flag web.enable-remote-write-receiver is enabled on your existing Prometheus instance, as it is required by the Aperture Controller.

  3. If you want to modify the default parameters or the Aperture Controller configuration, for example log, you can create or update the values.yaml file and pass it with install command:

    controller:
      config:
        log:
          level: debug
          pretty_console: true
          non_blocking: false
    helm install controller aperture/aperture-controller -f values.yaml

    All the configuration parameters for the Aperture Controller are available here.

    A list of configurable parameters for the installation can be found in the README.

  4. If you want to deploy the Aperture Controller into a namespace other than default, use the --namespace flag:

    helm install controller aperture/aperture-controller -f values.yaml --namespace aperture-controller --create-namespace

  5. Alternatively, you can create the Controller Custom Resource directly on the Kubernetes cluster using the below steps:

    1. Create a values.yaml for starting the operator and disabling the creation of Controller Custom Resource and pass it with install command:

      controller:
        create: false
      helm install controller aperture/aperture-controller -f values.yaml

    2. Create a YAML file with the below specifications:

      apiVersion: fluxninja.com/v1alpha1
      kind: Controller
      metadata:
        name: controller
      spec:
        image:
          registry: docker.io/fluxninja
          repository: aperture-controller
          tag: latest
        config:
          etcd:
            endpoints: ["http://controller-etcd.default.svc.cluster.local:2379"]
          prometheus:
            address: "http://controller-prometheus-server.default.svc.cluster.local:80"

      All the configuration parameters for the Controller Custom Resource are listed on the README file of the Helm chart.

    3. Apply the YAML file to the Kubernetes cluster using kubectl

      kubectl apply -f controller.yaml

Upgrade Procedure​

By following these instructions, you will have deployed the upgraded version of Aperture Controller into your cluster.

  1. Use the same values.yaml file created as part of Installation Steps and pass it with below command:

    helm template --include-crds --no-hooks controller aperture/aperture-controller -f values.yaml | kubectl apply -f -

    Once all the pods are in a running state after upgrade, run the below command to keep the Helm release updated:

    helm upgrade controller aperture/aperture-controller -f values.yaml

  2. If you have deployed the Aperture Controller into a namespace other than default, use the --namespace flag:

    helm template --include-crds --no-hooks controller aperture/aperture-controller -f values.yaml --namespace aperture-controller | kubectl apply -f -

    Once all the pods are in a running state after upgrade, run the below command to keep the Helm release updated:

    helm upgrade controller aperture/aperture-controller -f values.yaml --namespace aperture-controller

Verifying the Installation​

Once you have successfully deployed the resources, confirm that the Aperture Controller is up and running:

kubectl get pod -A

kubectl get controller -A

You should see pods for Aperture Controller and Controller Manager in RUNNING state and Controller Custom Resource in created state.

Uninstall​

You can uninstall the Aperture Controller and its components installed above by following the below steps:

  1. Uninstall the Aperture Controller:

    helm uninstall controller

  2. Alternatively, if you have installed the Aperture Controller Custom Resource separately, follow the below steps:

    1. Delete the Aperture Controller Custom Resource:

      kubectl delete -f controller.yaml

    2. Delete the Aperture Controller to uninstall the Aperture Operator:

      helm uninstall controller

  3. If you have installed the chart in some other namespace than default, run the below commands:

    helm uninstall controller --namespace aperture-controller
    kubectl delete namespace aperture-controller

  4. If you have installed the Contour chart for exposing the etcd and Prometheus service, run the below command:

    helm uninstall aperture -n projectcontour
    kubectl delete namespace projectcontour

  5. By default, the Secret and ConfigMap having SSL/TLS certificates generated by the Kubernetes Operator for itself and Aperture Controller are not deleted with above steps. If you want to delete them, run the below commands:

    kubectl delete secret -l app.kubernetes.io/instance=controller-aperture-controller-manager
    kubectl delete secret -l app.kubernetes.io/instance=controller
    kubectl delete configmap -l app.kubernetes.io/instance=controller

  6. Optional: Delete the CRD installed by the Helm chart:

    Note: Intentionally, deleting a chart by using Helm does not delete the Custom Resource Definitions installed by using the Helm chart.

    kubectl delete crd controllers.fluxninja.com
    kubectl delete crd policies.fluxninja.com