Skip to main content
Version: 2.32.2

Base Load Ramping Policy

Introduction​

This policy rolls out new features based on closed loop feedback. The ramping criteria are defined by drivers that determine conditions for advancing, reversing, or resetting the ramping to its initial state. The ramping process consists of a series of steps that progress if the feature is considered healthy.

info

See reference for the LoadRamp component that is used within this blueprint.

Configuration​

Blueprint name: load-ramping/base

Parameters​

policy​

Parameterpolicy.components
DescriptionList of additional circuit components.
TypeArray of Object (aperture.spec.v1.Component)
Default Value
Expand
[]
Parameterpolicy.policy_name
DescriptionName of the policy.
Typestring
Default Value__REQUIRED_FIELD__
Parameterpolicy.resources
DescriptionAdditional resources.
TypeObject (aperture.spec.v1.Resources)
Default Value
Expand
flow_control:
  classifiers: []
Parameterpolicy.kubelet_metrics
DescriptionKubelet metrics configuration.
TypeObject (kubelet_metrics)
Default Value
Expand
{}
Parameterpolicy.load_ramp
DescriptionIdentify the service and flows of the feature that needs to be rolled out. And specify load ramp steps.
TypeObject (aperture.spec.v1.LoadRampParameters)
Default Value
Expand
sampler:
  selectors:
    - control_point: __REQUIRED_FIELD__
  session_label_key: ''
steps:
  - duration: __REQUIRED_FIELD__
    target_accept_percentage: __REQUIRED_FIELD__
Parameterpolicy.start
DescriptionWhether to start the ramp. This setting may be overridden at runtime via dynamic configuration.
TypeBoolean
Default Valuefalse
policy.drivers​
Parameterpolicy.drivers.average_latency_drivers
DescriptionList of drivers that compare average latency against forward, backward and reset thresholds.
TypeArray of Object (average_latency_driver)
Default Value
Expand
[]
Parameterpolicy.drivers.percentile_latency_drivers
DescriptionList of drivers that compare percentile latency against forward, backward and reset thresholds.
TypeArray of Object (percentile_latency_driver)
Default Value
Expand
[]
Parameterpolicy.drivers.promql_drivers
DescriptionList of promql drivers that compare results of a Prometheus query against forward, backward and reset thresholds.
TypeArray of Object (promql_driver)
Default Value
Expand
[]

Schemas​

criteria​

Parameterthreshold
DescriptionThe threshold for the criteria.
TypeNumber (double)
Default Value__REQUIRED_FIELD__

promql_criteria​

Parameteroperator
DescriptionThe operator for the criteria. oneof: `gt | lt | gte | lte | eq | neq`.
Typestring
Default Value__REQUIRED_FIELD__
Parameterthreshold
DescriptionThe threshold for the criteria.
TypeNumber (double)
Default Value__REQUIRED_FIELD__

driver_criteria​

Parameterbackward
DescriptionThe backward criteria.
TypeObject (criteria)
Default Value
Expand
{}
Parameterforward
DescriptionThe forward criteria.
TypeObject (criteria)
Default Value
Expand
{}
Parameterreset
DescriptionThe reset criteria.
TypeObject (criteria)
Default Value
Expand
{}

promql_driver_criteria​

Parameterbackward
DescriptionThe backward criteria.
TypeObject (promql_criteria)
Default Value
Expand
{}
Parameterforward
DescriptionThe forward criteria.
TypeObject (promql_criteria)
Default Value
Expand
{}
Parameterreset
DescriptionThe reset criteria.
TypeObject (promql_criteria)
Default Value
Expand
{}

kubelet_metrics_criteria​

Parameterpod_cpu
DescriptionThe criteria of the pod cpu usage driver.
TypeObject (driver_criteria)
Default Value
Expand
{}
Parameterpod_memory
DescriptionThe criteria of the pod memory usage driver.
TypeObject (driver_criteria)
Default Value
Expand
{}

average_latency_driver​

Parametercriteria
DescriptionThe criteria of the driver.
TypeObject (driver_criteria)
Default Value__REQUIRED_FIELD__
Parameterselectors
DescriptionIdentify the service and flows whose latency needs to be measured.
TypeArray of Object (aperture.spec.v1.Selector)
Default Value
Expand
- control_point: __REQUIRED_FIELD__

percentile_latency_driver​

Parametercriteria
DescriptionThe criteria of the driver.
TypeObject (driver_criteria)
Default Value__REQUIRED_FIELD__
Parameterflux_meter
DescriptionFluxMeter specifies the flows whose latency needs to be measured and parameters for the histogram metrics.
TypeObject (aperture.spec.v1.FluxMeter)
Default Value
Expand
selector:
  - control_point: __REQUIRED_FIELD__
static_buckets:
  buckets:
    - 5
    - 10
    - 25
    - 50
    - 100
    - 250
    - 500
    - 1000
    - 2500
    - 5000
    - 10000
Parameterpercentile
DescriptionThe percentile to be used for latency measurement.
TypeNumber (double)
Default Value95

promql_driver​

Parametercriteria
DescriptionThe criteria of the driver.
TypeObject (promql_driver_criteria)
Default Value__REQUIRED_FIELD__
Parameterquery_string
DescriptionThe Prometheus query to be run. Must return a scalar or a vector with a single element.
Typestring
Default Value__REQUIRED_FIELD__

kubelet_metrics​

Parametercriteria
DescriptionCriteria.
TypeObject (kubelet_metrics_criteria)
Default Value__REQUIRED_FIELD__
Parameterinfra_context
DescriptionKubernetes selector for scraping metrics.
TypeObject (aperture.spec.v1.KubernetesObjectSelector)
Default Value__REQUIRED_FIELD__

Dynamic Configuration​

note

The following configuration parameters can be dynamically configured at runtime, without reloading the policy.

Parameters​

Parameterpass_through_label_values
DescriptionSpecify certain label values to be always accepted by the _Sampler_ regardless of accept percentage. This configuration can be updated at the runtime without shutting down the policy.
TypeArray of string
Default Value
Expand
- __REQUIRED_FIELD__
Parameterreset
DescriptionReset load ramp to the first step. This setting can be updated at the runtime without shutting down the policy.
TypeBoolean
Default Valuefalse
Parameterstart
DescriptionStart load ramp. This setting can be updated at runtime without shutting down the policy. The load ramp gets paused if this flag is set to false in the middle of a load ramp.
TypeBoolean
Default Valuefalse